 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC100LVEL58 2:1 Multiplexer The MC100LVEL58 is a 2:1 multiplexer. The device is pin and functionally equivalent to the EL58 and works from a -3.3V supply. With AC performance similar to the EL58 device, the LVEL58 is ideal for low voltage applications which require the ultimate in AC performance. * 440ps Typical Propagation Delays * High Bandwidth Output Transitions * PECL mode: 3.0V to 5.5V VCC with VEE = 0V * ECL mode: 0V VCC with VEE = -3.0V to -5.5V * 75kW Internal Input Pulldown Resistors * >4000V ESD Protection * Moisture Sensitivity Level 1, Indefinite Time Out of Drypack For Additional Information, See Application Note AND8003/D * Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 * Transistor Count: 729 devices Logic Diagram and Pinout: 8-Lead SOIC (Top View) 1 NC 1 8 VCC *For additional information, see Application Note AND8002/D http://onsemi.com 8 1 SO-8 D SUFFIX CASE 751 MARKING DIAGRAM* 8 KVL58 ALYW A L Y W = Assembly Location = Wafer Lot = Year = Work Week Da 2 1 MUX 7 Q PIN NAMES Pins Function Data Inputs Data Outputs Db 3 0 6 Q Da, Db Q SEL 4 5 VEE TRUTH TABLE SEL H L Data a b ORDERING INFORMATION Device MC100LVEL58D MC100LVEL58DR2 Package SO-8 SO-8 Shipping 98 Units / Rail 2500 Units / Reel (c) Semiconductor Components Industries, LLC, 1999 1 February, 2000 - Rev. 1 Publication Order Number: MC100LVEL58/D MC100LVEL58 ABSOLUTE MAXIMUM RATINGS1 Symbol VEE VI Iout TA VEE JA JC Power Supply (VCC = 0V) Input Voltage (VCC = 0V) Output Current Continuous Surge Characteristic Rating -8.0 to 0 0 to -6.0 50 100 -40 to +85 -5.7 to -3.0 Still Air 500lfpm 190 130 41 to 44 5% Unit VDC VDC mA C V C/W C/W Operating Temperature Range Operating Range1,2 Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Tsol Solder Temperature (<2 to 3 Seconds: 245C desired) 265 C 1. Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 2. Parametric values specified at: 100EL Series: -4.20V to -5.50V 10EL Series: -4.94V to -5.50V MC100LVEL58 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol IEE VEE IIH Characteristic Power Supply Current Power Supply Voltage Input HIGH Current 3.0 Min Typ 21 Max 28 3.8 150 3.0 Min 0C Typ 21 Max 28 3.8 150 3.0 Min 25C Typ 21 Max 28 3.8 150 3.0 Min 85C Typ 23 Max 30 3.8 150 Unit mA V A MC100LVEL58 AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol tPLH tPHL tr tf Characteristic Propagation Delay DQ SEL Q Min 340 350 100 Typ 435 455 Max 560 570 320 Min 340 350 100 0C Typ 435 455 Max 560 570 320 Min 350 360 100 25C Typ 440 460 Max 570 580 320 Min 370 380 100 85C Typ 450 470 Max 590 600 320 Unit ps ps Output Rise/Fall Times Q (20% - 80%) DC CHARACTERISTICS (VEE = VEE(min) - VEE(max); VCC = GND1), All input and output voltage parameters vary 1:1 with VCC -40C Symbol VOH VOL VOHA VOLA VIH VIL Characteristic Output HIGH Voltage(2) Output LOW Voltage(2) Output HIGH Voltage(2) Output LOW Voltage(2) Input HIGH Voltage Input LOW Voltage Min -1085 -1830 -1095 -- -1165 -1810 Typ -1005 -1695 -- -- -- -- Max -880 -1555 -- -1555 -880 -1475 -- Min -1025 -1810 -1035 -- -1165 -1810 0.5 0C to 85C Typ -955 -1705 -- -- -- -- -- Max -880 -1620 -- -1610 -880 -1475 -- Unit mV mV mV mV mV mV A VIN = VIL(max) Condition VIN = VIH(max) or VIL(min) VIN = VIH(max) or VIL(min) IIL Input LOW Current 0.5 -- 1. VCC = 0V, VEE = VEEmin to VEEmax, all other pins floating. 2. All loading with 50 ohms to VCC-2.0 volts. http://onsemi.com 2 MC100LVEL58 PACKAGE DIMENSIONS SO-8 D SUFFIX CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q http://onsemi.com 3 MC100LVEL58 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, England, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MC100LVEL58/D |
Price & Availability of MC100LVEL58
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |